Відео

your car is fully stock besides exhaust?

Do they blind oncoming traffic? Just curious?

Between you filming while driving talking about god knows what, to almost no narration about what you’re doing in the video, combined with having lazy answers in the comment section… just stop. Waste of time clicking this video.

I was looking for a quick idea. My daughters was broke when we picked it up last week (OEM?), replaced for $18 off Amazon. It worked twice then broke in the same spot as the other one. Poor design. This will work better. I may not even replace again.

Are they white color? they better that Pilips gt200?

I’ve watched another person change their coolant, they didn’t flush they removed some hex drain plugs on the block that coolant came out, I don’t have a torque wrench and I don’t want to mess around with that, isn’t a flush going to clean out that fluid anyway?

What’s the torque rate?..

Ha! I was getting ready to make a video similar to this. I see a bunch of jack wagons making videos with their freaky drills, sand paper, razor blades and many other methods. The glass would be better but usually have haze and cloudiness. I said surely some detail/paint correction guy has done the obvious and apply those same skills. It’s not rocket science to make glass shine if you use the right tools. Now my next experiment is going to be a ceramic coating to see if that provides any benefit. My guess is the heat will destroy it in the burner areas.

"IM THE ALPHA IM THE LEADER IM THE ONE TO TRUST +TRUST+ TOGETHER WE DO WHAT EVER IT TAKES, WE'RE IN THIS PACK FOR LIFE! 🧬 MEOWWWWWWWWWWWWWWWWW!!!

I'm not sure what the tool and the pad are that you used after the glass cleaner. Could you post a link or specify?

Well done! Thanks.

brown and black usually wrestle alot, not getting along together too well dunno. black usually get along really well with orange

1: that’s good that u will replace those horrible led bulbs from the right. Because the beam pattern looks bad. 2: if they are position from the led chips that’s left and right lt 3-9 o’clock, that beam pattern should not be like that. Thats also a bad beam pattern.

I just got a 2000 outback yesterday. This will definitely be the first upgrade I do to it

H7 on the Subaru had projector headlights. Projectors create an even beam with lower peak intensity.

Do yk where i can get a dip stick to read the level and to see the color?

Awesome. Thanks this helps a lot.

How'd it drive on the Motul Multi ATF?

That missing "spring" at 6:27 in the video caused the same problem on my car.

Another job for duct tape 😁

Where did you get a new actuator from? I have a Jeep Commander CRD 2007 and getting couple of the underboost codes which seem to indicate Turbo actuator needs replacement, but wondering which one to source

what did you do for the h1 pos/ ground? since grinding down the bracket spot

I just bought one today .

Is this car for sale?

I love this product tried it at the dollar general and now I can’t find it only on amazon

How is it the tool holding up and the battery?

hI my friend, Could you compare the lux for the simple night breaker, the night breaker 200. and cool blue intense,cool blue intense next gen bulbs?

If your overflow becomes full and your radiator continues to lose fluid without any external leaking from the system (so many places to check) then you have a head gasket leak between a coolant passage and a cylinder which causes the system to pressurize and force coolant out. I have a 1999 outback 2.5 and have put 70k miles on it with this condition. I keep topping off the radiator every 600 miles. It used to be every 1500 miles but it has slowly been getting worse. Subaru head gaskets are known for failing when coolant is not changed often enough since coolant pools up in the heads when the motor is shut off. That theory was derived from a guy on youtube who disassembles engines and explains the design of the engine in details. The h6 motor looks like it would be a pain to rebuild. It seems like a pain to even do the water pump since the timing chains and covers need removed.

I have an OSRAM LEDriving® HL Gen2 H4 leadlight bulb in my motorcycle headlight. It is way brighter than the normal 55/60w halogen bulb and it only consumes around 14w of power to do it, previously you would have needed a 80/100w halogen bulb, relays and heavy gauge wiring direct to the battery to get that much light, now it's so simple.

The same type of mine : )

Don't mind my ignorance. But if you pulled the drain plug out and only got 2L. How did pulling the pan make a difference and result in refilling 4L? Also, did you confirm the correct amount in trans with the OEM spec of nominal operating tempurature while using the service tool dipstick?

thank you for your honesty

Just ordered some and love the sound of a boxer engine

Philips night guide better than Philips ultinon essential?

That was exciting to watch!

Hi. I used oven cleaner on my new glasstop, (listening to Tiktok on how to clean a glasstop….lol) and let’s just say it ruined it and left a grey/dull haze on the two burners and I’ve tried everything to bring the shine back. Nothing. Do you believe this method will bring the shine back? Good thing I didn’t use the oven cleaner on the other burners.( which looks brand new) I only had the stove for 10 months and I ruined the other two. 🤣🤣🤣🤣 I need everything you mentioned in this video.💚

Hey bro, did you delete your dpf and egr?

I bought exactly these bulbs but i don t have that bright light does it have something with turnirng bulbs around or however you put them they will have the same effect

Wait, how did you get the clips in so easily?? I'm going nuts trying to get those in.

Wait the H7 Nightguide Platinums are no good? Got soooo confused looking at Phillips bulbs. First I found the Xtreme Vision +130 then realized that was replaced by the Xtreme Vision Pro +130. Now tonight I read about the NightGuide Platinums and like you I saw that forum post where the guy said he emailed Phillips and was told the NGP's are replacing the Xtreme Vision. What's confusing is that I also read they are basically the same bulb and this is the first time I'm hearing that the Nightguides are no good.

i just bought a impreza 2007. ej20 2.0i it was low on coolant all the time. but engine wouldnt overhead. after a couple of days of inspecting daily i released that the radiator was going bad and leaking from the top plastic part. have replaced it along with new pipe and termostate and radiator cap. looks fine now. what was the issue with one?

all that work and they look terrible lmao thanks for showing me what not to do tho

I recently had to replace the interior fan controller module of a 2005/06 Laredo. I suspected that the cabin filter was dirty, which caused the module to work harder than it should. However, when I removed the glove box, I couldn't locate the filter. After some searching, I found your video, which helped me understand that the filter is actually an after-market part! I just wanted to thank you for your assistance. Cheers!"

Confused you ended up using a product that looked like it was from chemical guys.

you aren't blinding other drivers? looks great

Oldie but goody. Does this work for 9007s also?

What fender flares are these?

Thank you for the review.

Only take the front of the van off if you have the arms of the Hulk. Otherwise stick your hands through without disassembling.

Worst video ever. You didn’t show anything and cut the camera every step.